Swisspor EPS insulation boards

EPS 040 Fasada expanded polystyrene boards

Boards manufactured by expanding polystyrene.

• thermal insulation in areas with low mechanical loads (wall insulation and additional wall insulation)
• insulation of walls and the undersides of floor slabs in external thermal insulation composite systems BSO (lightweight wet construction)
• insulation of external walls with cladding and a ventilated air gap (lightweight dry construction)
• external insulation beneath render of framed walls with timber sheathing and a ventilated air gap
• insulation of ring beams as permanent formwork beneath render
• insulation of lintels, window and door reveals and other thermal bridges
• insulation of external prefabricated sandwich panels
• thermal insulation of all types of multi-leaf walls

• λ – thermal conductivity at 10°C: ≤ 0,040 W/mK
• flexural strength: ≥ 100 kPa
• reaction to fire class: E

EPS 038 Dach Podłoga expanded polystyrene boards

• thermal insulation of floors, lofts and used and unused attics
• floors in residential and public buildings
• ground-bearing floors in residential and public buildings
• ground-bearing floors in industrial buildings under low and medium loads
• floors on floor slabs (including rigid structures)
• floors with underfloor heating systems
• floor slabs between heated and unheated rooms
• external floor slabs and floor slabs over drive-through passages
• internal floor slabs with lining fixed to the thermal insulation
• solid and ventilated floor slabs
• lightweight flat roof structures, e.g. trapezoidal sheet
• terraces and balconies
• pitched roofs between rafters
• pitched roofs above and below rafters

• λ – thermal conductivity at 10°C: ≤ 0,038 W/mK
• flexural strength: ≥ 125 kPa
• reaction to fire class: E

EPS 035 Parking expanded polystyrene boards

Boards manufactured by expanding polystyrene.

• thermal insulation in areas with higher mechanical loads (insulation of floors in industrial halls, car parks and garages)
• insulation of plinths in external thermal insulation composite systems (lightweight wet construction)
• insulation of waterproofed walls below ground level
• insulation of heavily loaded floors
• insulation of pitched roofs on the supporting structure beneath roof tiles
• insulation of flat roofs
• structural fill for road and railway embankments, bridge abutments and other civil engineering structures
• frost protection layer in road structures

• λ – thermal conductivity at 10°C: ≤ 0,035 W/mK
• flexural strength: ≥ 200 kPa
• reaction to fire class: E